Auxiliary Hydraulics; Hydraulic Block Type Outlet; Dual Remote Hydraulic Control System; Control Lever And Hydraulic Hose Connections - Kubota LX2610 Operator's Manual

HYDRAULIC UNIT
(1) 3-point hitch lowering speed
knob

AUXILIARY HYDRAULICS

Hydraulic outlet is (rear) provided on the tractor.

1. Hydraulic block type outlet

Hydraulic block type outlet is useful when adding
hydraulically operated equipment such as front end
loader, front blade, etc.
When an implement is attached
1. Remove the block cover.
2. Attach the block outlet cover (option).
When implement is not attached
(1) Block cover
84
(A) "FAST"
(B) "SLOW"
(C) "LOCK"
When implement is attached
(1) Block cover
(2) Block outlet cover (option)
(3) Outlet
(4) Inlet
Implement inlet
Max. flow
Max. pressure
NOTE :
• If the control valve of implement has the relief
valve, the tank port flow from implement should
be connected to the port (c).
2. Dual remote hydraulic control
system
The tractor is equipped with the double-acting 2-
segment hydraulic control valve for front loader.
To apply the hydraulic power take-off for general
attachments, keep the following point in mind.
2.1 Control lever and hydraulic hose
connections
Connect the control lever in its specified direction and
the hydraulic hoses to their specified ports.
AUXILIARY HYDRAULICS
(A) To implement inlet
(B) From implement outlet
18.9 L/min
(5.0 U.S.gals./min)
15.8 to 16.6 MPa
2
(161 to 169 kgf/cm )
(2292 to 2408 psi)
LX2610,LX3310