IBM Application System/400 Service Information page 82

Action
If only a type number is listed, go to the ''Type and Part
Failing Item Number Lisf' on page 2-62 to determine the part number.
Code Description
FI00320 Display station used as the console
Perform the problem isolation procedure specified in the ref-
erence code table for the reference code that indicated this
failing item code.
FI00350 IPL tape unit Exchange the following:
o
6343-Extemal 1/4-inch tape unit.
• 0001-Extemal 1/4-inch tape unit cable.
FIOO360 IPL disk unit Exchange the following:
• 6104-disk unit
• 6601---disk unit
FI00380 Twinaxial workstation I/O processor Exchange the following:
• 2661-Twinaxial workstation I/O processor
FI00500 SCSI cable Exchange the following:
• 0001-Extemal 1/4-inch tape unit cable.
• OOOO--Chassis
FI00580 Any disk unit item Exchange the following:
• 6104-disk unit
o
6601---disk unit
FI00601 Display station If a link protocol converter is used to connect the console to
the system, the protocol converter is the failing item.
FI00602 Cables between the workstation attach- Exchange the cables.
ment and the device
FIOO604
Printer Exchange the printer.
Fl00605 Magnetic stripe reader on the display Exchange the magnetic stripe reader.
station
FIOO607 Selector light pen on the display station Exchange the light pen.
FI00609 A unit reference code of FFFF was shown The faHing item for this error can be identified by running the
when the user entered ANZPRB (the complete ANZPRB command. The failing item is also in the
Analyze Problem command) from a work- problem log when the user enters WRKPRB (the Work with
station. Problem command).
F100610 Twinaxial workstation I/O processor Exchange the following:
o
2661-Twinaxial workstation 1/0 processor
FIOO612 Workstation cable Exchange the cable attached to the failing device.
FI00613
• If the reference code appeared on the
Exchange the device.
console when using WRKPRB (the
Work with Problem command), the
failing item is the display station,
printer, or modem that is directly
attached to the faHing port.
0
If the reference code appeared on the
control panel lights, the failing item is
the display station used as the
console.
FI00615 Twinaxial workstation I/O processor attach- Exchange the following:
ment
• 2661-Twinaxial workstation I/O processor
FIOO700 Remote data terminal equipment (DTE) or Inform the remote operator of the problem.
an attached device
FIOO701 Local communications cable Part numbers for the local communications cables are sup-
plied with FI codes FI00716 and FIOO717
2-56
AS/400 9401 Service Information