IBM Application System/400 Service Information page 42

6343
Reference Description/Action Failing
Code Perform all actions before exchanging Failing Items
Item
CC1A, Damaged cartridge detected or the tape unit failed MHGTCAR
CC1B
1. Remove the data cartridge and inspect it for the following conditions:
Tape unit
• The tape has run off one of the spools (the tape does not pass in front of
the mirror).
• The mirror is broken or skewed out of its normal position.
• The data cartridge belt is broken or damaged.
• The tape is not wound correctly on both spools.
• The tape is broken.
2. Exchange the data cartridge if it has one of the above conditions.
Note: If the tape has been broken in more than one cartridge, also exchange
the tape unit.
CC1E Unexpected end-of-media detected MHGTFOR
Ensure that you are using an IBM-approved data cartridge (see the System
Operator's Guide, SC41-8082). If the cartridge is approved, ask your next level of
support for assistance.
CC20, Tape unit detected a read or write error on tape medium MHGTCAR
CC22
1. Clean the recording head in the tape unit. Use the correct IBM Cleaning Car-
Tape unit
tridge Kit:
•
In Canada and the United States, use part 46G2675.
• In all other countries, use part 8191177.
2. Perform an IPl.
CC36 lOP detected incorrect response from the tape unit. Tape unit
CC38 114-inch tape unit failed Tape unit
The tape unit did not respond to commands from the lOP.
Ensure that the tape unit is powered on. If the tape unit does not become powered
on, see the tape unit manual and analyze the problem.
CC45 Tape unit detected a read or write error on tape medium MHGTCAR
1. Clean the recording head in the tape unit. Use the correct IBM Cleaning Car-
Tape unit
tridge Kit:
•
In Canada and the United States, use part 46G2675.
•
In all other countries, use part 8191177.
2. Perform an IPl.
CC4A Unexpected end-of-media detected MHGTFOR
CC4B Damaged cartridge detected or the tape unit failed Tape unit
MHGTCAR
CC54 Damaged cartridge detected or the tape unit failed. MHGTCAR
1. Clean the recording head in the tape unit. Use the correct IBM Cleaning Car-
Tape unit
tridge Kit:
• In Canada and the United States, use part 46G2675.
•
In all other countries, use part 8191177.
2. Perform an IPl.
CC5F 114-inch tape unit failed
Tape unit
CC65
Licensed Internal Code for the tape unit is not correct AOBOOE1
2-16
AS/400
9401 Service Information