IBM Application System/400 Service Information page 49

9143,9144
Reference
Description/Action Failing
Code Perform all actions before exchanging Failing Items Item
10n EEPROM update occurred
No action required. This reference code is logged for information only.
107F I/O processor Licensed Internal Code error AJEDAOO
1A03 I/O processor resource not available AJEDAOO
AJDG301
1A10 I/O processor resource not available
Chassis
The I/O processor error log has been filled. If it is possible to view the error log via
21F9941
FI01107
DST or other system level methods, correct those errors in the error log before
AJEDAOO
correcting this reference code. If there are no other error log messages, perform
"SDC-PIP3" on page 3-11.
3000 A permanent I/O processor failure occurred Chassis
3002 Tape or disk device failed to respond to selection
FI01105
Chassis
3006 A permanent I/O processor failure occurred Chassis
21F9941
3020 I/O processor detected a SCSI bus configuration error
USTUSER
Use the FI codes to find failing devices.
FI01105
Chassis
3030 A tape or disk device reported a failure FI01105
Chassis
3031 Type of tape or disk unit not known FI01105
AJEDAOO
3100 Tape or disk bus interface error occurred Chassis
Perform "SDC-PIP3" on page 3-11.
FI01105
3200 A tape or disk device reported a failure FI01105
MSTMEDA
3300 Tape unit detected a tape problem MSTMEDA
Tape unit
Cable
3400 Failure in initialization of a device task FI01105
Chassis
3500 I/O processor Licensed Internal Code error AJEDAOO
Chassis
3501 I/O processor Licensed Internal Code error AJEDAOO
4002 I/O processor Licensed Internal Code error AJEFDA10
Chassis
4003 I/O processor Licensed Internal Code error AJEFDA21
Chassis
4030 Data decompression failure, I/O processor operational MSTMEDA
Chassis
8300 A permanent I/O processor failure occurred Chassis
2'IF9941
8301 A permanent I/O processor failure occurred Chassis
21F9941
Chapter 2. Unit Reference Codes
2-23