IBM Application System/400 Service Information page 65

A6xx, B6xx,C6xx, D6xx
Reference Description/Action Failing
Code Perform all actions before exchanging Failing Items Item
6169
Licensed Internal Code install/restore utility problem UG6USR1
Perform "VUC-PIP1" on page 3-20.
6201 to Licensed Internal Code install/restore utility status code #SENUKE
6206,
Perform "VUC-PIP2" on page 3-20.
6208,
6209,
6210,
6211
6299 Licensed Internal Code install/restore utility status code #SENUKE
This reference code indicates that the Stand Alone Utility has completed and an
IPL from a disk unit has been started. This is an informational reference code and
does not indicate that an error has occurred. If this reference code is displayed on
the control panel for more than five minutes, IPL the system.
6301 Licensed Internal Code install/restore utility status code #SENUKE
Perform "VUC-PIP2" on page 3-20.
6330 Licensed Internal Code install/restore utility status code FI00360
Perform "VUC-PIP2" on page 3-20.
#SENUKE
6340 Licensed Internal Code install/restore utility status code
FI00350
Perform "VUC-PIP2" on page 3-20.
#SENUKE
6350 to Licensed Internal Code install/restore utility status code #SENUKE
6357,
Perform "VUC-PIP2" on page 3-20.
6360 to
6367
6901 to I/O bus failure FI00065
6909 AJDG301
6920 to OS/400 licensed program failed
AJDG301
6929
Perform "VUC-PIP8" on page 3-22.
6930 to
I/O bus failure
FI00065
6933 AJDG301
6934 OS/400 licensed program failed
AJDG301
Perform "VUC-PIP8" on page 3-22.
6935 I/O bus failure
FI00065
AJDG301
6936 to OS/400 Licensed Program fajlure
AJDG301
6937
Perform "VUC-PIP8" on page 3-22.
6938 to I/O bus failure FI00065
6944
AJDG301
6950 to
lOP failure
FI00310
6962
FI00065
AJDG301
6963 to lOP failure
FI0031 0
6966
Perform "VUC-PIP?" on page 3-21.
FI00065
AJDG301
Chapter 2. Unit Reference Codes
2-39