IBM Application System/400 Service Information page 136

5
a. Push outward on the latches located at
each end of the card.
b. Pull the card from the card socket and
place it on an ESD mat.
Note the location of the notch
E1
on the
storage card. You will need to install the
storage card in the socket with the notch in
the same position .
....
~
RV2B632-1
Note: When installing the cards, place a
card in the socket. Push the top edge of
the card toward the system processor card
until the card latches in the socket.
Install the main storage cards by reversing
the removal procedure.
This ends the procedure.
4-10
AS/400 9401 Service Information