IBM Application System/400 Service Information page 35

2661
Reference Description/Action Failing
Code Perform all actions before exchanging Failing Items Item
0209 WS lOP detected wrong device response to start command FI00604
Chassis
0210 Printer detected equipment error FI00604
0211 Printer detected equipment error FI00604
AJLMX2B1
Chassis
0212 Printer detected equipment error FI00604
0220 Device detected wrong command or device ID from WS lOP FI00604
AJLMX2B1
Chassis
0221 Device detected not valid value from WS lOP FI00604
AJLMX2B1
Chassis
0222 Device detected storage or data overrun FI00604
AJLMX2B1
Chassis
0223 WS lOP detected start command to printer was lost FI00604
FI00602
Chassis
0224 Device detected wrong start command from WS lOP FI00604
AJLMX2B1
Chassis
0225 WS lOP detected wrong exception response from device FI00604
Chassis
0230 to Printer detected equipment error FI00604
0239,
0240 to
0248
0249 WS lOP detected wrong request or response from device FI00604
Chassis
0281, Printer detected equipment error FI00604
0283 to
0289
0290 WS lOP detected no status change from device FI00604
Chassis
0291 WS lOP detected busy time-out from device
FI00604
Chassis
AOOO Too many devices active on the workstation lOP GSVBBBB
This error occurs if you attempted to activate more workstations than allowed.
Power off (or remove) one or more of the display stations (other than the console)
that are attached to this WS lOP. Perform an initial program load (IPL) from the
control panel to correct the problem.
Refer to your local workstation diagrams for the physical location of workstations if
required.
BOOO WS lOP fails to report part, model and serial number Chassis
Perform "TWSC-PIP1" on page 3-15.
Chapter 2. Unit Reference Codes
2-9