IBM Application System/400 Service Information page 73

B006
(B006) Common Licensed Internal Code Reference Codes
Note: If the failing item is a failing item (FI) code, go to "Failing Item (FI) Code Table" on page 2-55 to
determine which part number associated with the FI code is failing. If the failing item is not an FI code, go
to the failing item table following this reference code table for a description of the failing item.
Reference Description/Action
Falling
Code Perform all actions before exchanging Failing Items Item
1A01 1/0 processor resource not available CDAWKLD
A deactivation failed to get a resource controlled by Licensed Internal Code.
AJEDAOO
AJDG301
1A02 Not valid condition in 1/0 Processor Licensed Internal Code AJEDAOO
An error in an activation or deactivation occurred.
Chassis
21F9941
1A03 1/0 processor resource not available AJEDAOO
A resource that is needed to perform a requested function is not available in the
AJDG301
Licensed Internal Code.
CDAWKLD
1A04 Recovered from condition in Licensed Internal Code. AJEDAOO
The Licensed Internal Code has recovered from a condition that was not expected.
AJDG301
Chassis
21F9941
1A05 1/0 processor card or Licensed Internal Code error AJEDAOO
A microprocessor exception occurred on the 1/0 processor.
Chassis
21F9941
1A06
1/0 processor card or Licensed Internal Code error AJEDAOO
A microprocessor exception occurred on the 1/0 processor.
Chassis
21F9941
1A07 1/0 processor resource not available
CDAWKLD
The Licensed Intemal Code could not allocate memory resources on the 1/0
Chassis
21F9941
processor card.
AJDG301
1A08 Not valid condition in 1/0 Processor Licensed Internal Code AJEDAOO
The Licensed Internal Code found a condition that should not have occurred.
Chassis
21F9941
1A09 Threshold overflow Chassis
The 1/0 processor card has detected a threshold of recoverable error conditions.
21F9941
FI01117
The errors are either wrong interruptions or memory error corrections. If in commu-
AJEDAOO
nications, the line is still running.
Note: If a large number of these errors occur during a short time, they may be
caused by an electrically noisy environment, a defective communications 1/0
processor card or modem, or a communications 1/0 processor code problem.
1A10 Error reported to system Chassis
The liD processor error log is being filled faster than the errors are being reported
21F9941
FI01117
to the system. Check other errors reported to the system and correct them.
AJEDAOO
Chapter 2. Unit Reference Codes
2-47