IBM Application System/400 Service Information page 66

A6xx, B6xx,C6xx, D6xx
Reference Description/Action Failing
Code Perform all actions before exchanging Failing Items Item
6967 lOP problem Chassis
Perform "VUC-PIP8" on page 3-22.
AJEDAOO
FI00580
FI00500
AJDG301
6968 lOP returned bad status on bus command
FI00310
I/O processor returned incorrect bus status.
FI00065
AJDG301
6980 OS/400 licensed program failed AJDG301
Perform "VUC-PIP8" on page 3-22.
6990 to OS/400 Licensed Program failure AJDG301
69FF
Perform "VUC-PIP8" on page 3-22.
7001 ISDN call in rejected
GG6COMM
7002 Lines not selected GG6COMM
7003 Network interfaces not selected GG6COMM
7100 APPN session initiation attempt has timed out
GG6PL03
This reference code is used to indicate that VUC timed out on a request to initiate
GG6PL01
GG6PL02
a session. The PDP will indicate whether the original timeout condition still exists
#LCTRTSK
and what the corrective actions should be.
#LCCPTSK
#LCDSTSK
#LMTASK
#MSSAPPN
QLCCRTCD
#TP2SECS
QLCCRTLD
7101 APPN session initiation attempt has failed GG6PL04
This reference code is used to indicate that VUC attempted to satisfy a session
GG6PL05
GG6PL06
initiation request, but some failure condition was detected by VUC. The failure
#LCTRTSK
condition could be a configuration or operational problem in the network.
#LCCPTSK
#LCDSTSK
7201 Uninterruptible Power System reported a utility failure
This reference code is for information only. The Uninterruptible Power System
(UPS) is reporting a utility failure. The system is now running on the UPS bat-
teries.
Normally, no action should be taken as a result of information reference codes.
However, to isolate the root cause, use these suggestions:
1. Examine the date and time of the informational reference code.
2. Determine if any other reference codes have been logged at or before the
same date and time.
3. Begin the service approach based on these other logged errors.
2-40
AS/400 9401 Service Information