Mounting On Din Rails; Secure The Mounting Clips - Siemens SIMATIC IOT Operating Instructions Manual

Installing and connecting the device
3.2 Mounting the device
3.2.2

Mounting on DIN rails

3.2.2.1

Secure the mounting clips

Requirement
• The DIN rail is installed at the installation site (35 mm standard profile).
• Mounting bracket and mounting clamps
• Two screws
• T8 screwdriver
Secure the mounting clips for vertical mounting
1. Lay the rail clamp on the rear of the device.
2. Fasten the rail clamp with the supplied screws.
Other configurations for IOT2050
Secure the mounting clips for horizontal mounting
1. Lay the rail clamp on the rear of the device.
2. Fasten the rail clamp with the two supplied screws.
3. Lay the brackets on the rear of the device. Align the bracket edge with the device edge.
4. Fasten the brackets with the supplied screws.
24
IOT2050 SM
Operating Instructions, 03/2024, A5E39456816-AF
SIMATIC IOT2050