Direct Current Supply (Dc); Other Configurations For Iot2050; General Technical Specifications - Siemens SIMATIC IOT Operating Instructions Manual

Technical specifications

9.2 Other configurations for IOT2050

Note
Device can overheat!
The power supply cannot make unlimited power available. The auxiliary components
consume energy and produce heat.
The device may overheat. The device and the auxiliary components may be damaged.
9.1.5

Direct current supply (DC)

Technical specifications
Input voltage
Power consumption
Typical power consumption
Basic device
Arduino shields
USB ports
Expansion cards
9.2 Other configurations for IOT2050
9.2.1

General technical specifications

General technical specifications
Order number
Weight without mounting brackets
Power supply
Brief voltage interruption in accord-
ance with Namur
Current consumption
Noise emission
Degree of protection
Protection class
100
24 VDC (20.4 to 28.8 V)
max. 30 W
Power consumption (at a rated voltage of 24 V)
12 W
See section "Power demand of the components (Page 99)"
See order documents
•
•
12 to 24 VDC (9 to 36 V), no galvanic isolation
1
Up to 5 ms buffer time at 24 V DC and full load
Max. 10 events per hour; recovery time at least 10 ms
Max. 1.7 A
< 40 dB(A) according to DIN 45635-1
IP20 according to IEC 60529
Protection class III in accordance with IEC 61140
IOT2050 Basic: approx. 330 g
IOT2050 Advance/IOT2050 M.2: approx. 340 g
Operating Instructions, 03/2024, A5E39456816-AF
2
SIMATIC IOT2050