Expand Device; Insert Micro Sd Card/Nano Sim Card - Siemens SIMATIC IOT Operating Instructions Manual

Expand device

5.1

Insert Micro SD card/Nano SIM card

Applicable Configuration
This operation is only applicable for the following configurations:
• IOT2050 Basic: 6ES7647-0BA00-0YA2
• IOT2050 Advance: 6ES7647-0BA00-1YA2
• IOT2050 M.2: 6ES7647-0BB00-1YA2
• IOT2050 SM: 6ES7647-0CA00-1AA2
Requirement
• The device is disconnected from the power supply.
• Micro SD card or Nano SIM card that is suitable for industrial use.
Installation
NOTICE
Inserting a memory card
If you are using the Micro SD card/Nano SIM card in a device installed in a system, you must
observe the safety regulations for work on electrical systems.
Carefully insert the Micro SD card/Nano SIM card into the card holder without applying
excess force.
1. Open the card cover on the bottom.
2. Push the Micro SD card/Nano SIM card
correctly into the supporting frame. The
contacts of the Micro SD card/Nano SIM
card must point in the direction of the
motherboard.
3. Push the card cover back.
SIMATIC IOT2050
Operating Instructions, 03/2024, A5E39456816-AF
5
51