Power Demand Of The Components - Siemens SIMATIC IOT Operating Instructions Manual

•
•
Atmospheric pressure, Altitude
•
•
* Also note the following section "Power consumption of the components".
Mechanical ambient conditions
Vibration resistance, tested in accordance with IEC 60068-2-6
•
•
Impact resistance, tested in accordance with IEC 60068-2-27
•
•
9.1.4

Power demand of the components

Maximum power consumption of the auxiliary components
For the ambient temperature for permitted mounting position, refer to Ambient conditions
(Page 98).
Auxiliary com-
ponents
All components
Mini PCIe card
USB 2.0 high
current
Interface for S7-
1200 SM mod-
ules
1
2
3
SIMATIC IOT2050
Operating Instructions, 03/2024, A5E39456816-AF
5 to 95% at 30°C, no condensation
Operation
5 to 95 % at 25/55 °C, no condensation
Storage/transport
1080 to 795 hPa, corresponds to an elevation of -1000 m to 2000 m
Operation
1080 to 660 hPa, corresponds to an elevation of -1000 to 3500 m
Storage/transport
Vibration load 1g, 10 cycles per axle:
Operation
•
•
Storage/transport •
•
150 m/s
Operation
250 m/s
Storage/transport
Maximum permitted power
consumption
+5 V +3.3 V
-- 1.5 A
500 mA --
1200 m --
A
May amount to maximum 3.0 A for up to 100 ms at start-stop torque of device
May amount to maximum 1.2 A for up to 100 ms at start-stop torque of device
Long-term operation under high-temperature conditions at an average load of 5.6W is not rec-
ommended.
5 to 8.4 Hz, deflection 3.5 mm
8.4 to 200 Hz, acceleration 9.8 m/s
5 to 8.4 Hz: Deflection 3.5 mm
8.4 Hz to 500 Hz: Acceleration 9.8 m/s
, 11 ms
2
, 6 ms
2
Maximum total power
+1.5 V
6.5 W
0.3 A Permitted power distribution
1 2
--
• Mini PCIe card: 5.6 W
--
Technical specifications
9.1 IOT2050 SM
2
2
; USB: 2.5 W
3
99