Power Demand Of The Components - Siemens SIMATIC IOT Operating Instructions Manual

Technical specifications
9.2 Other configurations for IOT2050
* Also note the following section "Power consumption of the components".
Mechanical ambient conditions
Vibration resistance, tested in accordance with IEC 60068-2-6
•
•
Impact resistance, tested in accordance with IEC 60068-2-27
•
•
9.2.4

Power demand of the components

Maximum power consumption of the auxiliary components
For the ambient temperature for permitted mounting position, refer to Ambient conditions
(Page 103).
Auxiliary com-
ponents
All components
Arduino shield
Mini PCIe card
USB 2.0 high
current
USB 3.0 high
current
1
2
3
3
104
Vibration load 1g, 10 cycles per axle:
Operation
•
•
Storage/transport •
•
150 m/s
Operation
250 m/s
Storage/transport
Maximum permitted power
consumption
+5 V +3.3 V
-- 1.5 A
500 mA --
900 mA --
May amount to maximum 3.0 A for up to 100 ms at start-stop torque of device
May amount to maximum 1.2 A for up to 100 ms at start-stop torque of device
Rail mounting Vertical: 0 to 50 °C, the maximum power of M.2 card(E Key + B Key) 1.5 W, total
power is 6 W
Rail mounting Vertical: 0 to 45 °C, the maximum power of M.2 card(E Key + B Key) 2 W, total pow-
er is 6.5 W
5 to 8.4 Hz, deflection 3.5 mm
8.4 to 200 Hz, acceleration 9.8 m/s
5 to 8.4 Hz: Deflection 3.5 mm
8.4 Hz to 500 Hz: Acceleration 9.8 m/s
, 11 ms
2
, 6 ms
2
Maximum total power
+1.5 V
6.5 W
Permitted power distribution
0.3 A
1 2
• Arduino shield: 4 W, USB: 2.5 W
--
• Arduino shield: 2 W, USB: 4.5 W
• Mini PCIe card: 2 W; USB: 2.5 W; Arduino shield:
--
2 W
• M.2 card(E Key + B Key)
Arduino shield: 2 W
2
2
: 2 W; USB 2.5 W;
3
Operating Instructions, 03/2024, A5E39456816-AF
SIMATIC IOT2050