Other configurations for IOT2050
3.2.2.2
Mounting on DIN rails
Mounting
1. Place the device and rail clamp on the upper edge of the standard profile rail at the position
shown and push the device down.
2. Swing the rail clamp of the device from below through the standard profile rail.
3. Push the device in the direction of the standard profile rail. You will hear the device click into
place.
SIMATIC IOT2050
Operating Instructions, 03/2024, A5E39456816-AF
Installing and connecting the device
3.2 Mounting the device
IOT2050 SM
25