Table of Contents
Advertisement
Noise Cancel
The Noise Cancel function reduces random
noise components in the received or
transmitted signal. Set the function for both
receiving and transmitting.
z RX
OFF: The Noise Cancel function is
OFF.
Low: Reduces random noise
components in the received signal
to approximately one half.
Mid: Reduces random noise
components in the received signal
to approximately one third.
High: Reduces random noise
components in the received signal
to approximately one tenth.
• Radio
Set the reduction level of the Noise
Cancel function.
• Hailer
Set the reduction level of the Noise
Cancel function when the Hailer
function is turned ON.
z TX
ON:
Reduces random noise
components in the transmitted
signal to approximately one third.
OFF: The Noise Cancel function is
OFF.
• Microphone
Select whether or not to use the Noise
Cancel function for the transmit signal.
• COMMANDMIC
Select whether or not to use the Noise
Cancel function for the transmit signal
when using the optional HM-195
command microphone.
• Mobile Device
Select whether or not to use the Noise
Cancel function for the transmit signal
when using the RS-M500 mobile
device application.
MENU SCREEN
PWR SW from MIC
Select whether or not to turn OFF the
transceiver at the same time that you turn
OFF the command microphone.
L The optional command microphone is
required to use this function.
z All Units
When you turn OFF the command
microphone, the transceiver is turned
OFF at the same time.
z Own Unit
The transceiver is not turned OFF
even if you turn OFF the command
microphone.
Model
(For only the European version)
Select the country where you operate the
transceiver.
L After select the country, "The Settings are
reset. Are you sure?" is displayed. Push
OK
to return to the Confi guration
screen.
L If no country is selected, "General" is
automatically selected.
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
84
Advertisement
Table of Contents
