Table of Contents
Advertisement
7
DIGITAL SELECTIVE CALLING (DSC)
D Receiving a Distress Relay call
When a Distress Relay call is received:
• An alarm sounds.
• The following screen is displayed and the backlight blinks.
• "
" blinks.
1.
Push any
Alarm OFF
2.
Push the Software Key below the next operation.
Ignore :
Hold :
Pause :
Accept :
3.
Push
STBY
screen.
37
.
Returns to the operating screen.
The call is saved in the DSC Log.
"
" blinks continuously until you display
the call message.
Holds the RX call task, and returns to the
Main screen.
Pause
is not displayed if the "CH Auto
Switch" item is set to "Manual." (p. 46)
Pauses the countdown until the assigned
channel is automatically selected.
Select
Resume
to resume the countdown.
The call is saved in the DSC Log.
Accepts the call. Channel 16 is
automatically selected. Monitor Channel
16 as a coast station may require
assistance. After Channel 16 is selected,
select your next operation by pushing the
Software Key below the following options.
STBY
:
Returns to the operating
screen.
History
:
Displays the "Distress History"
screen.
, and then
OK
to return to the operating
Advertisement
Table of Contents
