Using The Voice Scrambler - Icom iC-M605 Instruction Manual

D Manual Horn function
1. Push [MENU].
2. Select "Manual Horn" then push [ENT].
(Horn > Manual Horn:)
3. Hold down [Horn] to sound a horn.
• While holding down [Horn], the horn sounds, and the screen
shown to the right is displayed.
• To adjust the horn volume level, rotate dial.
4. Push [EXIT] to return to the Main screen.
NOTE: While in the Horn mode, the transmit and
receive functions are disabled. When the transceiver is
transmitting, the Horn function is disabled.
OTHER FUNCTIONS

■ Using the Voice Scrambler

The Voice Scrambler provides private communications. In
order to receive or send scrambled transmissions, you must
activate the scrambler function. You also need to set the
scrambler code in the Menu screen. (p. 88)
The scrambler function automatically turns OFF when
Channel 16 or 70 is selected.
1. Select an operating channel other than Channel 16, 70 or
the weather channels.
2. Push [Ω] or [≈] until [SCBL] is displayed in the Software
Key area.
3. Push [SCBL] to turn the Voice Scrambler ON or
OFF.
• The "SBL" icon is displayed when the voice scrambler is ON.
D Setting scrambler codes
Set the code to between 1 and 32 in the Menu screen. In
order to understand each other, all transceivers in your group
must use the same scramble code.
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
69