Table of Contents
Advertisement
D Resetting the MMSI code and the ATIS ID
After Icom accepts your request, you will be sent an Activation code for the reset
operation. Enter the Activation code to your transceiver and reset the MMSI code and the
ATIS ID.
CAUTION:
• The Activation code can be used only once.
• The reset operation clears both the MMSI code and the ATIS ID.
1.
Open the "MMSI Clear" screen.
[Menu] > Settings > Configuration > MMSI Clear
2.
Select "Activate," and then push [ENT] or [CH/ENT].
3.
Enter the 16-digit of Activation code.
L The code on the right is only an example.
TIP:
• Select a number using [◄] and [►].
• Push [ENT] or [CH/ENT] to enter the selected
number.
• Select "←" or "→" on the screen or rotate [CH/
ENT] to move the cursor.
4.
Select
Finish
to set the entered code.
• When the Activation code is successfully entered, the
screen on the right is displayed.
L If the entered code is not correct, an error message is
displayed, and then returns to the input screen. Enter
the correct Activation code.
OK
5.
Push
to clear the MMSI code and ATIS ID.
• The transceiver restarts.
NOTE: See page 8 for how to enter your new MMSI
code and ATIS ID.
TROUBLESHOOTING
14
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
110
Advertisement
Table of Contents
