Table of Contents
Advertisement
D Setting the WLAN in the Access Point mode
1.
Open the "Configuration" screen.
[MENU] > Settings > WLAN > Advanced Settings >
Confi guration
2.
Select "Access Point."
• "Access Point Settings" screen is displayed.
L When "Requires reconfi gure the phone. Change
setting?" is displayed, Push
3.
Push [▲] or [▼], or rotate [CH/ENT] to select the set
items and then push [ENT], [CH/ENT], or [►].
Set items
SSID:
Enter the SSID.
L Up to 32 characters can be entered.
Security:
Select the authentication type.
Password:
Enter an authentication password of 8
to 63 characters.
L The entered password is masked
Channel:
Set to specify the channel by pushing
[▲] or [▼].
IP Address:
Enter the IP address of the transceiver.
Subnet Mask: Enter the Subnet Mask (the range of
the IP addresses used in the network).
Enter the IP address and the Subnet
Mask to be matched with the network
that the mobile device connects to.
TIP:
• Select
to enter numbers and letters, and
enter symbols.
• Select number, character or space using [▲], [▼],
[◄], and [►].
• Push [ENT] or [CH/ENT] to enter the selected
character.
• Select "←" or "→" on the screen, or rotate
[CH/ENT] to move the cursor.
4.
After setting the items, push
• The "Advanced Settings" screen is displayed.
L The "
" icon is displayed at the top of the screen.
OK .
like as "******."
Save
.
WLAN SETTINg
to
11
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
90
Advertisement
Table of Contents
