Table of Contents
Advertisement
2
PANEL DESCRIPTION
D Information area
The MMSI code* and the following indicators
are displayed in the Information area.
* ATIS code is displayed if only the ATIS
code is entered in NLD and FRG version.
Indicator
Displayed when receiving a signal
or when the squelch is open.
Displayed while transmitting.
Displayed when high power is
25W
selected.
Displayed when low power is
1W
selected.
Displays the selected channel
USA, INT,
group, INT (International), USA,
CAN,
CAN (Canada), WX (Weather
WX,
channel), ATIS or DSC.
ATIS,
L When the WX-Alert is set to
ON, " " is displayed.
DSC
(For only the USA version)
Displayed when the transceiver
receives valid position and time
data.
Blinks when invalid GPS data is
being received.
Displayed when the WLAN
function is activated.
In the Client mode, displays
the WLAN signal strength while
connected to a wireless network.
Displayed when the Auto Foghorn
function is activated. (p. 75)
Displayed when the battery
voltage is less than 11 V.
Displayed while accessing to the
mobile device using the RS-M500.
L The number indicates the
number of connected mobile
devices.
Displayed when there is a target
in the CPA/TCPA alarm function.
• Displayed when there are
unread DSC messages.
• Blinks when a DSC message
is received.
Displayed when the "CH Auto
Switch" in DSC Settings is set
to an option except "Accept
after 10 sec.".
5
Description
D Channel area
The selected operating channel number,
channel name, and the following indicators
are displayed in the Channel area.
Indicator
Displayed when a Favorite
channel is selected.
Displayed when the Call channel
CALL
is selected by holding down
[16/C] for 1 second.
Displayed when a Duplex
DUP
channel is selected.
Displayed while in the Standby
STBY
mode.
Displayed while in the Radio
Telephone (RT) mode.
RT
L Returns to the Standby mode
if no operation occurs during
the preset period of time.
Displayed after making or
receiving a DSC call.
L If the transceiver is in the
DSC
Multiple Task mode, the
number of DSC tasks is
displayed by the indicator.
Displayed when in the RX Hailer
mode. (p. 73)
SCAN
Displayed during a Priority scan.
(p. 16)
16
*
Displayed during a Normal scan.
SCAN
*
(p. 16)
DUAL
Displayed during Dualwatch.
(p. 18)
16
*
Displayed during Tri-watch.
TRI 16
*
(p. 18)
Displayed when the Attenuator
LOC
function is turned ON.
(For only the USA version.)
* Not usable in NLD version
Description
Advertisement
Table of Contents
