Table of Contents
Advertisement
7
DIGITAL SELECTIVE CALLING (DSC)
■ Sending DSC calls (other)
NOTE: To ensure proper DSC operation, be sure to correctly adjust the "CH 70 SQL
Level" item on the Menu screen. (p. 47)
D Sending an Individual call
An Individual call enables you to send a DSC signal to only a specifi c station. You can
communicate after receiving the Acknowledgment "Able to comply."
NOTE: You can also compose an Individual call to an AIS target on the Plotter screen or
the AIS list. (pp. 51, 54)
1.
Push
Other DSC
• The "Compose Non-Distress" screen is displayed.
L You can also display the "Compose Non-Distress" screen
by selecting the "Other DSC" item on the Menu screen.
2.
Select "Msg Type," and then push [ENT] or [CH/ENT].
3.
Select "Individual," and then push [ENT] or [CH/ENT].
• Returns to the "Compose Non-Distress" screen.
4.
Select "Address," and then push [ENT] or [CH/ENT].
5.
Select the station to send an Individual call to, and
then push [ENT] or [CH/ENT].
• Returns to the "Compose Non-Distress" screen.
L You can also select "Manual Input" to manually enter
the target station ID.
6.
Select "Channel," and then push [ENT] or [CH/ENT].
7.
Select a channel to assign, and then push [ENT] or
[CH/ENT].
L The assigned channels are preset by default.
Call
8.
Push
•
"Transmitting Individual Call" is displayed, and then
"Waiting for ACK" is displayed.
L If Channel 70 is busy, the transceiver stands by until
the channel becomes clear.
25
.
to send the Individual call.
Advertisement
Table of Contents
