Resetting The Mmsi Code And The Atis Id - Icom IC-M510E Instruction Manual

14
TROUBLESHOOTING

■ Resetting the MMSI code and the ATIS ID

If you need to reset the MMSI code and the ATIS ID*, you must contact Icom and obtain
an Activation code.
* For only the German (FRG) and Netherlands (NLD) versions.
D Requesting the Activation code
Contact Icom by e-mail with the following information.
(E-mail address: MMSI-reset-request@icom.co.jp)
Required information:
• Model name
• Request code (16-digit number)
L See below how to check the Request code on your transceiver.
Checking your Request code:
You can check the Request code on your transceiver's menu screen.
1. Open the "MMSI Clear" screen.
[Menu] > Settings > Configuration > MMSI Clear
L The "MMSI Clear" menu is displayed only when the
MMSI code or the ATIS ID has been set.
2. Select "Request Code," and then push [ENT] or
[CH/ENT].
• A 16-digit of Request code is displayed.
L The code on the right is only an example.
109