Icom IC-M510E Instruction Manual page 96

10
MENU SCREEN
D Settings
Key Assignment
z Soft Key 1~21
You can change which Software Key
functions to display, and their order. You
can assign up to 21 Software Keys at a
time.
L The usable Software Key functions and
their order may differ, depending on the
transceiver version or presetting.
L Some Software Keys may not be
usable, depending on other item
settings.
z Set Default
Sets the Software Key function order
as default.
L The default setting may differ,
depending on the transceiver version or
presetting.
UTC Offset
Set the offset time between Universal Time
Coordinated (UTC) and your local time to
between –14:00 and +14:00 (in 1 minute
steps).
Inactivity Timer
The transceiver automatically returns to the
operating screen if you push no key for the
set period of time for each mode.
z Not DSC Related
Setting for when a screen that is not
related to DSC is displayed.
z DSC Related
Setting for when a screen that is related
to DSC is displayed.
z Distress Related
Setting for when a screen that is related
to a Distress call is displayed.
z RT Related
Setting for when the transceiver is in the
Radio Telephone mode.
83
GPS
Selects a satellite to be used for GPS
(Global Positioning System) to pinpoint
the geographic location of your transceiver
anywhere in the world.
This setting may not be usable, depending
on the transceiver version or presetting.
z GPS
The GPS (Global Positioning System) is
permanently set to ON.
z GLONASS
Selects whether or not to use the data
from the GLONASS (GLObal'naya
NAvigatsionnaya Sputnikovaya Sistema)
satellites.
z SBAS
Turns the SBAS (Satellite Based
Augmentation System) function ON or
OFF.
When turning ON this function, the GPS
position accuracy can be improved.
Speaker
Select the speaker to use.
Transceiver and Mic:
The audio is heard from both the internal
speaker and the speaker microphone.
Transceiver only:
The audio is heard from only the internal
speaker.
RX Hailer
Set the RX Hailer function.
L See page 73 for details.