REPI.ACEMERT
3.
Slide the module partially into the slot, and
reconnect
any cables removed from the old module (Figure 4-6).
Q
Q
Figure 4·6:
Module Cable Replacement
4.
Slide the module into the slot until firmly seated,
and
close the locking levers (Figure 4·7).
Figure 4·7:
Module Replacement
5.
Close the Patch and Filter Panel assembly, and
refasten
the two captive screws.
6.
Reconnect any removed cables to
the
Patch
and
Filter
Panel assembly.
4.5