Table of Contents
Advertisement
:::
MAINTENANCE
5.
Enter the memory size {in kilobytes), for example:
EHXMS> MEMORY.SIZE 1024<RETOR.N>
6.
To run all the memory tests, enter:
EHXMS> START<RETOR.R>
There are
12
memory
tests
{Table
3-3}.
particular test, enter:
EHXMS> START n<RETOR.R>
where n is the number of the test.
To
run
a
7.
To get descriptions of the diagnostic commands, options,
and syntax, use the HELP command:
EHXMS> HELP<RETURN>
The command options are enabled
and
diabled
with
the
ENABLE and DISABLE commands.
For example:
EHXMS> ENABLE PARITY<RETOR.N>
enables (and is required} to run the Memory Parity
Test
{Test
8).
The status of the options, and the specified memory size
can be displayed with the VIEW command:
EHXMS> VIEW<RETURN>
Options status: BELL
=
ENABLED, ERRORS • ENABLED,
HALT
=
ENABLED, LOOP
=
DISABLED,
MAP • ENABLED, PARITY
=
ENABLED,
RELOCATION
=
ENABLED, TRACE
=
DISABLED
Memory size
=
1024 kB
Figure 3·4:
Memory Diagnostic EHXMS View Command
3·13
Advertisement
Table of Contents
