Table of Contents
Advertisement
::
RBPLACBMERT
CAUTION - Fan Power
The polarized, de power connector to the cooling
fan
must
be
installed
with
the curve of the
connector matching the curve of the fan housing,
for correct fan rotation (Figure 4·23).
Figure 4·23:
Fan Power Connector
2.
Place the power supply in positon, making sure that
the
rear fan power cable is routed over the top of the fan.
3.
Insert the five power supply hold·down screws.
4.
On the front of
the
power
supply,
reconnect
(Figure
4-22):
a.
J7
b.
J8
c.
J9
d.
JlO
6-pin, keyed connector.
9-pin connector.
18-pin connector.
4-pin, keyed connector.
5.
Refasten the Patch and
Filter
Panel
assembly
captive
screws.
6.
Replace the storage subsystem cover.
7.
Make sure that the voltage selector switch
is
set
for
local requirements.
4·21
Advertisement
Table of Contents
