Table of Contents
Advertisement
REPLACEMENT
8.
Pull the levers at each end of the module to release it,
and carefully pull the module toward you (Figure 4·5).
l"igure 4·5:
Module Removal
9.
Note the settings of any switches
and
jumpers
on
the
removed module.
4.1.2
Module Replacement
1.
Normally, swi;ches and jumpers on the replacement module
should
be
set
to
the
same
position as those on the
removed module.
(Also see Chapter 1.)
2.
Make sure the locking levers at each end of
the
module
are in the released position.
4.4
Advertisement
Table of Contents
