Table of Contents
Advertisement
Troubleshooting
States of the AIR MONITOR indicator and Their Meanings
If the AIR MONITOR indicator blinks and an error code appears, unplug the power supply plug, wait at least 5 seconds, and then
reinsert the power supply plug and operate. If an error code still appears, handle it by following the setting procedure.
Error code
47
An electrical component is faulty.
¼ Contact the place of purchase.
The temperature sensor is malfunctioning.
¼ Contact the place of purchase.
The humidity sensor is malfunctioning.
¼ Contact the place of purchase.
An electrical component is malfunctioning.
¼ Contact the place of purchase.
Are the pre-filter, dust collection
filter, humidifying filter unit,
humidifying tray, and water tank
attached?
These lamps may blink if the
unit is operated without a part
attached.
Is there a buildup of dust on the
pre-filter?
Is the air outlet blocked?
Cause/Solution
„ If all the parts are attached
An electrical component is malfunctioning.
¼ Contact the place of purchase.
„ If a part is not attached
¼ Unplug the power supply plug, reattach the parts, and
then restart operation.
„ If there is no dust buildup
An electrical component is malfunctioning.
¼ Contact the place of purchase.
„ If there is dust buildup
¼ Unplug the power supply plug, clean the pre-filter, and
then restart operation.
„ If the air outlet is not blocked
An electrical component is malfunctioning.
¼ Contact the place of purchase.
„ If the air outlet is blocked
¼ Remove any obstacles blocking the air outlet, and then
restart operation.
3 long
beeps
►Page 35
Advertisement
Table of Contents
