Table of Contents
Advertisement
FAN lamps (white)
Indicate the active FAN setting in 4 levels (Quiet, Low, Standard, Turbo).
MODE lamps (white)
Indicate the MODE in operation.
AUTO operation lamp (white)
Lights up during AUTO operation. ►Page 21
Communication lamp
Communication ON/OFF button
Used when operating the air purifier via smartphone.
• Each press cycles between communication "ON" and "OFF". The communication lamp lights up if communication is set to "ON".
• Perform connection settings before using. ►Page 18-20
HUM setting button
Press to turn the Humidifying Operation ON/OFF and to select the humidity setting.
• Humidifier lamp turns off when humidification is set to "OFF".
About the airflow rate and humidity setting symbols
Symbol table
Symbol
Setting
Quiet
►Page 23
Fan
Low
Standard
AUTO button
Optimum operation will be performed according to
the condition of the room. ►Page 21
ON/OFF button
Press to turn the power ON, press again to turn
OFF.
After operation stops, humidifying filter drying
operation may be performed. ►Page 24
MODE button
Press to select the desired MODE.
FAN setting button
Press to select the desired airflow
rate. ►Page 22
Humidity setting
Turbo
Low
Read First
►Page 24
Standard
High
12
Advertisement
Table of Contents
