Table of Contents
Advertisement
Operation
Operation
MODE
FAN setting ("Quiet", "Low", "Standard", "High*") is automatically adjusted according to the degree
of air impurity and humidity (when the Humidifying operation is active).
Purifying capacity increases as airflow rate rises.
AUTO FAN
If the operating sound bothers you, the airflow rate range can be changed.
* The maximum airflow rate during AUTO FAN MODE is "High", which is less powerful than "Turbo".
• Press
• Degree of air impurity corresponds to the volume of dust and the intensity of odours in the ambient air.
In Power saving mode within ECONO MODE, the FAN setting automatically switches between
"Quiet" and "Low" only. Power consumption (*1) and operating sounds are reduced.
If the air is clean and the set humidity level has been achieved (when the Humidifying operation is
active), after about 5 minutes passes, Monitoring mode automatically activates. Recommended for
use during sleep hours.
*1 By comparison to AUTO FAN MODE (about 15.4Wh), power consumption in ECONO MODE (about
ECONO
• Air purification and humidification capacity will be reduced as only "Quiet" and "Low" operation are used.
• Since the air in the room is not drawn in while the fan is stopped, the sensitivity of the PM2.5 sensor,
• Press
25
Automatic airflow rate adjustment
if you want to change the humidity level.
Saving energy
8.4Wh) is about 7.0Wh lower.
Test conditions case in Japan: operation in 10m² area over 1 hour. Assuming 1 cigarette was smoked
immediately after the unit was turned on.
Power saving mode
The unit operates
automatically with an
airflow rate of "Quiet"
and "Low".
odour sensor, and humidity sensor will decrease. If you do not want the sensitivity of the sensors to be
reduced, set Monitoring mode to "OFF".
if you want to change the humidity level.
Usage and Function
If the air is clean and the set
humidity has been reached
for about 5 minutes...
If the humidity level falls, or
dust or odours are
detected...
►Page 31, 32
►Page 31, 32
Monitoring mode
• The fan starts and stops periodically, and
dust, odour and humidity is checked.
• Turn "Off" the following functions to further
reduce power consumption.
Streamer
Humidification
OFF
Active plasma ion
OFF
*2 The humidifier lamp remains lit.
OFF
(*2)
Advertisement
Table of Contents
