State Of The Air Monitor Indicator And Their Meanings - Daikin MC80ZVM Operation Manual

State of the AIR MONITOR indicator and Their Meanings

In case the AIR MONITOR indicator blinks and an error code appears, unplug the power supply plug, wait at least 5 seconds, then
insert the power supply plug again and operate the unit. If an error code still appears, please refer to the procedures below:
AIR MONITOR Indicator
Error Code
Electrical parts are faulty.
Electrical parts are malfunctioning.
Temperature sensor is faulty.
Humidity sensor is faulty.
Are the pre-fi lters, dust
collection fi lter attached?
These lamps may blink if the
unit is operated without a part
attached.
Is there a buildup of dust on
the pre-fi lters?
Is the air outlet blocked?
3 long
beeps
Cause
If all parts are attached
Electrical parts are faulty.
If one or more parts
are not attached
If there is no buildup of
dust
Electrical parts are faulty.
If there is a buildup of
dust
If the air outlet is not
blocked
Electrical parts are faulty.
If the air outlet is
blocked
Troubleshooting
Solution
Contact the place of purchase
Unplug the power supply
plug, reattach the parts, and
then restart operation.
Unplug the power supply
plug, clean the pre-fi lter, and
then restart operation.
►Page 27
Remove any obstacles blocking the
air outlet, and then restart operation.
32