Daikin MCK70ZVM-H Operation Manual page 20

Humidifying air purifier
Hide thumbs Also See for MCK70ZVM-H:
Table of Contents

Advertisement

Read First
Operating the air purifier via smartphone
Preparation Before Connection
The customer is responsible for providing:
• Smartphone or tablet with minimum supported version of Android or
iOS, specified on app.daikineurope.com.
• Internet line and communication device, such as a modem, router, etc.
• Wireless LAN access point
• Installed free ONECTA app
Note: If needed, the SSID (Service Set Identifier) and the KEY
(password) are located on the unit.
WARNING
When operating the air purifier from outside the home, it is not possible to check the condition of the air purifier,
its surroundings, people in the room, etc., so be sure to adequately check the safety in advance before using it.
Depending on the circumstances, people may be killed or seriously injured, or property damage may result.
„ Check the following in advance (while at home)
• Make sure that the power supply plug is firmly inserted all the way
to the base.
There should be no dust buildup on the power supply plug.
(Heating, ignition, and fire may result due to poor contact and
defective insulation)
• Make sure that there are no existing schedule timer reservations
set by another person.
(May cause poor physical condition due to unexpected start or
stop of operation. May cause adverse effects to plants and
animals)
• Make sure there are no problems with the air purifier. Make sure
that changes in airflow will not adversely affect people in the room.
(Make sure there are no objects that can fly away)
(Airflow may cause objects to fall, resulting in fire, injury or stains
on household items)
Connection settings
1
Check if router has WPS built-in
2
If router has built-in WPS
1 Press
to activate the wireless LAN
connection adapter.
2 Press and hold
the communication lamp on the unit flashes orange,
press the WPS button* on the router within 2 minutes.
• How to operate the WPS button varies by router.
For details, refer to the manual supplied with the router.
* If using an automatic connection function other than WPS,
refer to the manual attached to the router when operating the
automatic connection button.
19
Connect air purifier to network
for about 5 seconds and, once
WPS button
„ Check the following before and while operating the air
purifier from outside the home
• If you know that there are people at home, let them know that you
will start or stop operation remotely.
(If someone is at home standing on a stool or ladder, they may be
surprised at the sudden start or stop of operation, and may fall off
the stool or ladder. Also, bad physical condition may be caused by
sudden changes in the indoor environment)
• Operation of the air purifier can be started and stopped by
pressing the buttons on the air purifier itself, even when it is
being operated from outside the home.
• Do not operate the air purifier remotely if there are people in the
room who cannot operate it by themselves, such as small
children, people with disabilities, elderly people, etc.
• Frequently check the settings and operating conditions.
Bad physical condition and adverse effects to plants and animals
may be caused by sudden changes in the indoor environment.
If an error occurs with the air purifier, stop operation immediately
and contact the place of purchase.
Check again via the operation screen to make sure that operation
is stopped.
Setting is complete once the communication lamp on
the unit lights green.
• The lamp may light red before turning green, until the connection between
the wireless LAN connection adapter and the router is complete, depending
on the communication environment; however, this is not a malfunction.
If the communication lamp on the unit lights orange, repeat steps 1 to 2.
If connection continues to fail, follow the steps in
If router does not have built-in WPS
3 Connect your smartphone and router via wireless LAN.
• Open wireless LAN in settings on the smartphone to check that
your smartphone is connected to the SSID of the router in use.
4 Launch the app and establish settings.
• Open the installed app "ONECTA" and operate in
accordance with the on-screen guidance.
5 Operate the air purifier.
• You can now operate the air purifier using your smartphone
at home or on the go.
Internet
Router
►Page 20 .

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mck70zvm-wMck70zwMck70zh

Table of Contents