Table of Contents
Advertisement
Read First
Names of Parts and Operations
Operating / Indicator panel
Child proof lock
Hold down
(The same applies when you want to cancel.)
Child proof lock lamp (white)
Lamp will be lit when the child proof lock is active. When lit
up, operations will be restricted. When buttons are pressed,
only a tone (3 short beeps) will sound, preventing
misoperation by small children.
Attention
If the unit is unplugged when Child proof lock is active, Child
proof lock is turned off.
AIR MONITOR setting lamps (white)
Indicate the Air monitor setting.
• μg/m
(PM2.5 concentration)
3
• °C (current indoor temperature)
• % (current indoor humidity)
BRIGHTNESS button
During operation, each press cycles through operating panel lamp brightness levels.
Use this function if the lamps bother you during sleep hours, etc.
• The following lamps do not turn off even if the brightness is set to OFF.
"AUTO operation lamp, MODE lamp, FAN lamp, Humidifier lamp, Humidity setting lamps, Child proof lock lamp, Communication lamp, Water
supply lamp"
11
for about 2 seconds to set.
AIR MONITOR button
Allows you to change the item you want to monitor
in the air (PM2.5, temperature, or humidity).
BRIGHT
Humidity setting lamps (white)
Indicate the humidity setting in 3 levels (Low, Standard,
High).
Humidifier lamp (white)
Lights up during Humidifying Operation
Setting.
• Slowly blinks during humidifying filter
drying operation.
►Page 24
DIM
OFF
Advertisement
Table of Contents
