Table of Contents
Advertisement
2
Press
to change the setting*.
Each press cycles between "Normal"
and "Low".
"Normal"
"Low"
„ Operation status of streamer
Streamer output
Setting
Normal
Quiet, Low
ON–OFF
Standard
ON–OFF
Turbo
AUTO FAN/
ANTI-POLLEN/MOIST/
ON–OFF
CIRCULATOR
ECONO
ON–OFF
AUTO operation
ON–OFF
• The streamer operation status ON–
OFF means that the streamer turns
ON and OFF automatically
depending on the degree of air
impurity and airflow rate.
About the streamer lamp
• When the setting condition of
streamer is "ON–OFF" or "ON", it is
always lit up.(However, it is unlit
during monitor mode)
It is unlit when the setting condition of
streamer is "OFF".
* If the lamps do not change even after the settings were changed, unplug the unit, wait at least 5 seconds, then re-insert the power supply plug and
repeat the above procedure from the beginning.
Press
A short beep sounds and the ANTI-
POLLEN lamp and set FAN lamp will
blink.
setting
Low
OFF
"Normal"
ON
OFF
3
.
[Blinking]
"Low"
Advanced Settings
4
While the lamp is blinking,
unplug the power supply
plug, wait at least
5 seconds, and then insert
the power supply plug
again.
Setting is now complete.
Power supply plug
Power socket
• If this procedure is not performed,
the unit will not return to regular
operation mode.
• The settings will be remembered
even if the power supply plug is
removed.
28
Advertisement
Table of Contents
