Table of Contents
Advertisement
Transport and location
30
TO REDUCE VIBRATION AND SOUND AND TO ENSURE THAT THE MACHINE IS CORRECTLY
BALANCED, IT IS ESSENTIAL THAT THE FOUR BASE LEGS OF THE WASHING MACHINE REST
UNIFORMLY UPON THE FLOOR. DO NOT PLACE ANY TYPE OF ANTI-VIBRATORY DEVICE
BETWEEN THE WASHER AND THE FLOOR.
NEVER INSTALL THE WASHER OVER AREAS BUILT WITH COMBUSTIBLE MATERIAL.
IF WASHERS ARE INSTALLED ON METALLIC SURFACES, AN ELECTRICAL CONDUCTOR
INDEPENDENT TO THE WASHER GROUND MUST GROUND THESE SURFACES.
Specific warning for appliances installed IN THE USA /CANADA.
To reduce the risk of fire, this appliance must be fastened or otherwise secured to an uncovered
concrete floor.
Alternatively the appliance should stand on a metal plate, at least the same size as the appliance and
minimum thickness of 1/16 inch.
Cod.nº 429043
Rev. No. 21/0519
Advertisement
Table of Contents
