Single Host Configuration For Logical Units - Accusys ACS-8910 User Manual

4.1.3 Single Host Configuration for Logical Units

The ACS-8910 RAID controller can support up to 8 logical units. A
RAID array can be divided into multiple logical units. A logical unit
is that portion of a disk array seen by the host system as a single
logical device. Each logical unit is identified to the host by its
Logical Unit Number.
1. Please complete the Single host configuration steps first.
2. Press the [ENT] button to open the "6 RAID Funcs" menu.
3. Repeatedly press the [▼] button until the "62 Init R5/R3"
menu is displayed, then press the [ENT] button.
4. Repeatedly press the [▼] button until the "STOP" option is
displayed, then press the [ENT] button.
5. Press the [ESC] button to return to the "Main Menu" menu.
6. Press the [ENT] button to open the "1 RAID Parmas" menu.
7. Press the [▼] button until the "14 Slice" menu is displayed,
then press the [ENT] button.
NOTE: The Slice will allow you to divide the partition size of
the ACS-8910.
8. Repeatedly press the [▼] button until the "141 Slice0(MB)"
menu is displayed, then press the [ENT].
9. Key-in the capacity that required for Slice 0, then press the
[ENT] button.
10. Press the [▼] button to select from "142 Slice 1(MB)" to
"148 Slice7(MB)", then follow the steps 8 and 9.
11. Press the [ESC] button to return to the "Main Menu" menu.
12. Repeatedly press the [▼] button until the "2 SCSI Params"
menu is displayed, then press the [ENT] button.
30