Table of Contents
Advertisement
4.3.5 System Params menu
The System Params menu configures the internal operation of the ACS-8910. To avoid having the
configuration altered by unauthorized personnel you can enable the password function from
Configuration Mode. Also, by selecting the "Pager Info", "FAX Info" and "Company Info" options,
you will be altered when a disk failure occurs. The Pager and FAX require an external modem to be
attached to the modem port.
Sub-menu options
41 Passwd Info
Description:
Sub-menu options
42 Pager Info
Description:
Sub-menu options
Description:
Description:
Description:
Sub options
411 Passwd Check
412 Set Passwd
Enable the password function by selecting "Set Passwd" and
changing the default password.
Sub options
421 Paging
Enable / Disable Pager function.
422 Pager1 No.
Sub options
Settings
423 Pager2 No.
Enter the pager number to notify
4231 Tel No.
4232 Pin No.
424 Code
Enter the code displayed on the pager
4241 Part 1.
4242 Part 2.
425 Repeat #
20, 15, 10, 5
( #: times )
Setup page times
426 Interval
20, 15, 10, 5
Page the pager numbers every interval time.
427 Page NOW
None
Enable paging notification when a disk failure occurs. One or two
pagers can be notified with a unique code that can be up to 28
characters. For each pager you can enter the telephone number and
pin number (if required). The pager(s) can be notified up to 20
times at intervals (in minutes) of up to 20 minutes. Use the Page
NOW option to immediately send a page.
Settings
Disable, Enable
Up to 8 characters
Settings
Disable, Enable
Enter the pager number to notify
4221 Tel No.
4222 Pin No.
Default setting
16 characters
16 characters
16 characters
16 characters
5
5
None
52
Default setting
Enable
00000000
Default setting
Disable
16 characters
16 characters
Advertisement
Table of Contents
