Accusys ACS-8910 User Manual page 37

20. Repeat the steps from 11 to 18 to select the Secondary Host.
21. Repeatedly press the [▼] button until the "5 NVRAM"
menu is displayed, then press the [ENT] button.
22. Repeatedly press the [ ▼ ] button until the "51 Update
NVRAM" menu is displayed, then press the [ENT] button.
23. Repeatedly press the [▼] button until the "Yes" option is
displayed, then press the [ENT] button.
24. Repeatedly press the [▼] button until the "53 Restart" menu
is displayed, then press the [ENT] button.
25. Repeatedly press the [▼] button until the "Yes" option is
displayed, then press the [ENT] button.
NOTE: This will automatically restart the ACS-8910.
26. Press the [ENT] button to open the "6 RAID Funcs" menu.
27. Press the [▼] button until the sub-menu "62 Init R5/R3"
option is displayed, then press [ENT] button.
28. Repeatedly press the [▼] button until the "STOP" option is
displayed, then press the [ENT] button
29. Press the [ESC] button to return to the "Main Menu" menu.
30. Press the [ENT] button to open the "1 RAID Parmas" menu.
31. Repeatedly press the [▼] button until the sub-menu "14
Slice" option is displayed, then press the [ENT] button.
NOTE: The Slice will allow you to divide the partition
size of ACS-8910.
32. Repeatedly press the [▼] button until the "141 Slice0(MB)"
menu is displayed.
33. Key-in the capacity that required for Slice 0, then press the
[ENT] button.
37