Raid Funcs Menu - Accusys ACS-8910 User Manual

4.3.7. RAID Funcs menu

The RAID Funcs menu allows different functions to be performed on the ACS-8910.
NOTE: Any changes made to 61 Format Disk, 62 Init RAID 5, 63 R5 Check will cause data
permanently erased on the disks.
Sub-menu
61 Format Disk
Description:
Sub-menu options
62 Init R5/R3
Description:
Sub-menu options
63 R5/R3 Check
Description:
Sub-menu options
64 Beeper
Description:
Sub options
611 Format Disk1
612 Format Disk2
613 Format Disk3
614 Format Disk4
615 Format Disk5
616 Format Disk6
617 Format Disk7
618 Format Disk8
619 Format Disk9
61A Format Disk10
61B Format Disk11
61C Format Disk12
61D Format Disk13
61E Format Disk14
61F Format Disk15
61G Format Disk16
61H Format ALL
Low level Format for the disk. This option is only available when
the ACS-8910 is not configured. This option is not mandatory but
optional. Most new disks do not require a low level format. Used
only if drive is encountering problems.
Settings
Stop, Start
When configuring a disk group for RAID Level 3 or 5. During
an initial R3 or 5 configuration this is automatically executed.
Settings
Stop, Start
To verify the R5/R3 configuration. This option should be
executed when initially configuring for R5/R3.
Settings
Clear, Enable, Disable
Turn on/off the audible alarm when an error occurs or
during an Init R5/R3, R5 Check.
Settings
Stop, Start
Stop, Start
Stop, Start
Stop, Start
Stop, Start
Stop, Start
Stop, Start
Stop, Start
Stop, Start
Stop, Start
Stop, Start
Stop, Start
Stop, Start
Stop, Start
Stop, Start
Stop, Start
Stop, Start
Default setting
Stop
Default setting
Stop
Default setting
Enable
55
Default setting
Stop
Stop
Stop
Stop
Stop
Stop
Stop
Stop
Stop
Stop
Stop
Stop
Stop
Stop
Stop
Stop
Stop