Installing Cables; Pins Ide Cables - Accusys ACS-8910 User Manual

3.5 Installing Cables

There are three kinds of cables attached in the package of ACS-8910. They are "80 Pins IDE cables",
"Extension Cable (3-in-1)" and "10-pin to 9-pin D-sub male Interface Cable". Follow the instructions to
complete the cable installation as described below.

3.5.1 80 Pins IDE cables

The following drawing shows the steps on how to install the eight pieces of 80 Pins IDE Cables.
1. Connect and ,
2. Connect
an IDE hard drive.
3. Repeat Step1 and 2 to complete the installation of eight pieces of 80 Pins IDE Cables and
hard drives.
and .
with a standard IDE hard drive, or a hot swappable mobile rack that was inserted
Proprietary 40 pins connector A
Proprietary 40 pins connector B
Standard 40 pins IDE connector
IDE Channel 1 Proprietary 40 pins Socket for
connector A
IDE Channel 1 Proprietary 40 pins Socket for
connector B
22