Chapter 2 – Installation
Host connection
SCSI configuration
Connect a SCSI cable from the host
system SCSI card to one of the SCSI
connectors on the daughter board and to
an external terminator. Users setting up a
dual host configuration should connect
two SCSI cables – one linking to each
host.
Fibre configuration
1.
Use an HSSDC2 cable to connect the
bridge
board
daughterboard. Users setting up a dual
host configuration should connect two
cables.
2.
Connect the bridge board to each host
using
a
separate
pluggable (SFP) module and optical
cable.
Read the pre-installation notices earlier in this chapter before proceeding with
host connection.
(ACS-5160)
to
the
small
form-factor
29