Table of Contents
Advertisement
3.4.1 Installing SO DIMM Module
Please follow below instructions to install SO-DIMM module.
1.
Power off the system and disconnect the power connector.
2.
Locate the SO DIMM socket
3.
To install a memory card, hold the memory card
slot. The edge connector is divided into two unequal lengths. With the controller box facing
you, the shortest edge is closest to the front of the box, the longest end is nearest the back.
4.
Hold the card at a shallow angle (about 25 degrees) and insert the edge connector into the
connector slot. The "gold teeth" of the edge connector should no longer be visible when the
card is fully inserted.
5.
Press the module downwards so that it is flat inside the compartment. You can hear an
audible click as the latches
To remove a module that is already in place, unhook the latches on either side of the module. Put the
card in vertical position., and lift it out of the socket.
on the controller board.
with the edge connector side towards the
of the connector lock the card in place.
21
Advertisement
Table of Contents
