Accusys ACS-8910 User Manual page 38

34. Press the [▼] button to select from "142 Slice 1(MB)" to
"148 Slice7(MB)", then repeat the steps 8 and 9.
35. Press the [ESC] button to return to the "Main Menu" menu.
36. Repeatedly press the [▼] button until the "21 Primary
SCSI" menu is displayed, then press the [ENT] button.
37. Repeatedly press the [▼] button until the "216 LUN map"
menu is displayed, then press the [ENT] button.
38. Repeatedly press the [▼] button until the "2161 LUN 0"
menu is displayed, then press the [ENT] button.
39. Follow the table shown below to setup the "LUN"
LUN 0
LUN 1
LUN 2
LUN 3
LUN 4
LUN 5
LUN 6
LUN 7
NOTE: The LUN numbers depend on how many slices you set.
40. Press the [ESC] button and the [▼] button until the "22
Secondary Host" menu is displayed, then press the [ENT]
button..
41. Repeat the steps from 36 to 39 to select the Secondary Host.
42. Press the [ESC] button to return to the "Main Menu" menu.
43. Repeatedly press the [▼] button until the "5 NVRAM"
menu is displayed, then press the [ENT] button.
44. the [▼] button until the "51 Update NVRAM" menu is
displayed, then press the [ENT] button.
45. Repeatedly press the [▼] button until the "Yes" option is
displayed, then press the [ENT] button.
Slice 0
Slice 1
Slice 2
Slice 3
Slice 4
Slice 5
Slice 6
Slice 7
38