Accusys ACS-8910 User Manual page 69

Problem: Unable to send a Page or FAX using the modem port.
Possible Cause: The Page and Fax options are not enabled.
Solution: Go to the Configuration Mode and enable Page and FAX notification via the System
Params menu option.
Possible Cause: The default modem initialization string is not compatible with your modem.
Solution: Change the modem initialization string in the System Params option. Refer to your
modem manual for its initialization string.
The following modem models require their own initialization strings.
Modem Model
Motorola
ModemSURFR
28.8
Multitech
Multimodem 2834ZDX
Hayes
Accura 288 V.34+FAX
Practical Peripherals
PM144MT II
GVC
F-1128V/T2
US Robotics
Sportster 28800
Problem: The front panel LCD displays alternating "Zz" characters.
Cause: These characters are displayed when the cache is full with write request's data that have
not been processed. It will halt requests from the host to flush the data in the cache.
Solution: None needed.
Problem: The front panel LCD displays alternating "Ww" characters.
Cause: These characters are displayed to indicate the write requests in the cache are being processed.
When these characters are displayed, the ACS-8910 will halt requests from the host (see above).
Solution: Make sure the "WRITE BUFFER" option of the "RAID Params" menu is enabled. In
addition, more cache memory may be required. By increasing the cache memory the write buffer
space increases and will be able to handle the higher write requests.
Problem: Newly installed memory fails during Self-Test or is not detected.
Possible Cause: Memory SO-DIMM module may not be properly seated or may not be supported
by the particular ACS-8910 model.
Solution: Re-sit the memory module in to the socket and retry. If it continues to fail try moving it
to the other memory socket. Make sure the correct memory type is being installed. The ACS-8910
supports 144-pin SO-DIMM SDRAM.
Initialization String
AT&D\Q1E
V.34
AT&D0&E5E0
AT&D0&K4E0
AT&K4
AT&D0&B1&H2
AT&H2&I1&R1&B1
Baud Rate
Up to 38400
Up to 38400
38400 only
Up to 38400
38400 only
38400 only
69
FAX Class
1 & 2
2 only
1 & 2
2 only
1 & 2
1 only