Table of Contents
Advertisement
4.3.6 NVRAM menu
The NVRAM menu options control the configuration information. When using this menu option the
ACS-8910 required to be off-line. Any change made in this group will cause data on the drives to be
permanently erased.
Once a configuration change has been made the NVRAM (where the settings are stored) must be
updated. If a change causes an error or if the controller fails, use the "Erase NVRAM" option to
clear the contents of NVRAM restoring the default values. To enable a change to take effect, the
ACS-8910 controller must be restarted. Use the Restart option to automatically reset the ACS-8910
controller.
Sub-menu options
51 Update NVRAM
Description:
Sub-menu options
52 Erase NVRAM
Description:
Sub-menu options
53 Restart
Description:
Settings
No, Yes
Store the settings for all the options. Any change has to be
saved in NVRAM,.in order to have this change to take
effect.
Settings
No, Yes
Clear the contents of NVRAM and restore the default
settings.
Settings
No, Yes
Reset the ACS-8910. Use this option after changing any
settings to allow them to take effect.
Default setting
No
Default setting
No
Default setting
No
54
Advertisement
Table of Contents
