Install Heatshift Take-Off Collars To Appliance; Fit Appliance Into Framing - Valor 2700KN Installation Manual

Installation
Install HeatShift Take-Off Collars to Appliance
1. Install the collars on the holes on top of the appli-
ance's case (6 screws each).
See "Appendix D—HeatShift™System" on page 74 for
more details regarding the installation.
WARNING
A l l F O U R ( 4 ) t a k e o f f s M U S T B E
C O N N E C T E D T O P L E N U M ( S ) .
Appliance Preparation

Fit Appliance into Framing

1. Taking great care not to cut your hands on the sheet
metal edges, lift the appliance and place it in the
framing. Make sure that the unit is at the right height
with consideration to the height of the hearth or com-
bustible fl ooring.
2. Fold out four front mounting tabs and recess the
appliance in the framing as shown.
3. Fasten the unit to framing using 4 screws or nails at
the mounting tabs.
Note: The sheet metal front face of the appliance is
fl ush with the framing studs.
Appliance fl ush to framing
4. If desired and possible, screw the four fl oor mount-
ing tabs to the fl oor.
fl ush
front mounting
face of tabs (4)
appliance
33