Table of Contents
Advertisement
Installation
Rocks & Shale Set 1714RSS
Material required
• Black steel platform (supplied with appliance)
• Rock & Shale Set, which contains:
• 5 twigs
1
• 34 rocks (assorted colors)
• 1/2lb-bag of 3/4" black shale
• 1/2lb-bag of 3/4" grey shale
Carefully unpack the kit, as the logs are fragile.
2
3
x 34
Installation
1. Install the steel platform around the burner as
indicated (no screws). The openings in the platform
should be underneath.
Installed platform
2. Distribute the mixed shale by hand directly onto
the burner, forming a single layer. Do not pour
from the bag and do not pour too much to avoid
blocking the burner ports. Take care not to cover
the pilot light.
3.
Place one rock behind the pilot light shield.
Fuel Beds
51
Advertisement
Table of Contents
