Adjustment - Pilz PSEN sl2-IL1-P Operating Manual

Adjustment

9 Adjustment
}
The stated operating distances (see
safety switch and actuator are installed facing each other in parallel. Operating distances
may deviate if other arrangements are used.
}
Note the maximum permitted lateral and vertical offset (see
offset [
}
The guaranteed holding force can only be achieved when the adjustment was carried out
correctly.
}
Always test the function with a connected evaluation device.
Operating Manual PSEN sl2-IL1/2/3-P
1005909-EN-02
21]).
Technical details [ 52]) only apply when the
Lateral and vertical
| 38