Operation - Pilz PSEN sl2-IL1-P Operating Manual

Operation

11 Operation
Possible states of the LED
Status indicators
LED
Device
Safety Gate
Lock
Input
Operating Manual PSEN sl2-IL1/2/3-P
1005909-EN-02
NOTICE
The safety functions should be checked after initial commissioning and each
time the plant/machine is changed. The safety functions may only be
checked by qualified personnel.
CAUTION!
Contaminated surfaces can reduce the holding force of the electro-
magnet.
Make sure that the contact surfaces are clean.
LED off
LED on in green, yellow or red
LED flashes (500 ms on, 500 ms off) in green, yellow or red
LED flashes quickly (50 ms on, 950 ms off) in yellow or red
LED flashes very quickly (25 ms on, 475 ms off) in yellow
Display of the previous state without change (only used in case of a
fault)
Display of the state as in normal operation (only used in case of a
fault)
The unit is ready for operation
Actuator is within the response range
Guard locking active
The unit is ready for operation
| 40